Mr Surfacer 1000 Modeling Filler is used to fix imperfections on plastic models before painting. Mr Surfacer 1000 has finer granules than Mr Surfacer 500 and can be sanded to a finer finish. Can be used to fill bumps, dents, scratches, for removing bubbles, texturing and ejector pin marks. Apply with paintbrush or with a toothpick to fill larger areas. Filler can be roughly shaped using a cotton swap soaked in lacquer thinner then send for final finish. Use with adequate ventilation.
ATTENTION: Contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.